Time Settings - National Geographic 90-68500 Bedienungsanleitung

WEATHER TREND
Display
Trend rising
ALTIMETER MODE
Enter the ALTIMETER mode by pressing the [MODE]
button. The altimeter in meter will display. Press [-] but-
ton to switch between the display of Altimeter in meter
or local pressure in mb/hPa.
Upon inputting the current air pressure in the initial setup
(refer to initial setup procedure), the unit will calculate the
altitude of the device above sea level.
Remark: the inputted air pressure value will affect the
reading.
steady falling
- 22 -
You can re-set the current air pressure anytime in ALTI-
METER mode.
In ALTIMETER mode:
• ℃Press and hold [MODE] button for around 3 seconds,
the digits of mb/hPa will flash. Press [+] / [-] to set the
value of current air pressure
• ℃Press [MODE] button to confirm and then the unit will
calculate your Altimeter

TIME SETTINGS

Enter the TIME mode by pressing [MODE] button
In TIME mode:
• Press and hold [MODE] button for around 3 seconds,
the hour digits will flash. Press [+] / [-] to set the hour
digits
• Press [MODE] button to confirm and then the minute
digits will flash, then press [+] / [-] to set the minute
digits
• Press [MODE] button again to select 12/24 hour and
then °C / °F display format