Cue; Skip Buttons; Skip; Fast Search Buttons - Reloop SPIN! Bedienungsanleitung

33. Cue button
By using this button you will change to cue mode. There are two possibilities in
order to set a cue point.
a) Cue pause
In playback mode push the play/pause button -32- in order to change to
pause mode. Now push the cue button in order to set a cue point.
b) Loop in
During playback or in pause mode you can push the loop in button in order
to set a cue point. The hot keys are "F1" (player 1) and "F9" (player 2).
34. Forward and reverse button
Via this button you can determine the playback direction of the track (forward or
reverse). In timecode mode this button shows the direction of the record.

35. Skip buttons

Push these buttons in order to load the previous or next track from your Spin!
library.

36. Fast Search buttons

Via these buttons it is possible to fast search within a track. In timecode mode
this function is deactivated.
37. Pitch Bend buttons
Activate the pitch vernier adjustment via the pitch bend button. By pushing and
holding the pitch bend buttons you can temporarily increase or decrease the
pitch. Release the button and the player will return to the pitch that has
previously been set via the pitch fader. By turning the jog wheels in PC control
mode this function is also available. In timecode mode this function is
deactivated.
67