Care & Cleaning; Service And Customer Care - Kenwood CM170 Series Bedienungsanleitung

3 Add either a permanent filter or a
paper filter. Add the coffee, use the
spoon provided (approximately 1
level spoon per large cup). Then
close the filter door.
4 Put the jug on the hotplate.
5 Plug in and switch on, the light will
glow.
6 Don't remove the jug until brewing
has finished. The hotplate will keep
your coffee hot, but the sooner you
drink it, the better it will taste.
7 When the jug's empty, switch off by
pressing the on/off switch. Let the
machine cool down before cleaning.
●
If you haven't used the machine for
a while, run one lot of water through
it (without coffee) to clean it out. Fill
the tank to the top cup mark when
you do this.
●
Never put the jug in the microwave.
care & cleaning
●
Always switch off and unplug before
cleaning.
●
Never put the machine in water or let
the cord or plug get wet.
●
Don't wash parts in the dishwasher.
jug, lid
●
Wash, then dry.
permanent filter
●
Wash, then dry.
filter door
●
remove it: open and lift off. Wash
then dry.
body
●
Wipe with a damp cloth, then dry.
Don't use abrasives - they'll scratch
the plastic.
descaling
You'll know when limescale has built
up because your coffee will take
longer to come through. When this
happens it's time to descale.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run several lots of
water through the machine to clean
it out. Fill the tank to the top cup
mark when you do this.
4 Wash the parts.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
●
using your machine
●
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
3