Control Panel; Beep Sound - Panasonic NNGT469MGPG Bedienungsanleitung

NN-GT469M
(1)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(12)
This oven is equipped with an energy saving function.
NOTE:
1. When in stand-by mode the brightness of the display will be reduced.
2. The oven will enter stand-by mode, when first plugged in and immediately after the last
operation has completed.
En-6

Control Panel

(1) Display Window
(2) Auto Weight Microwave Programs Pad
(3) Auto Weight Combination Program Pad
(4) Time Pads
(5) Microwave Power Pad
(6) Grill Power Pad
(7) Combination power pad
(8) Auto Weight Defrost
(9) Clock Pad
(10) Delay/Stand Pad
(11) Weight selection pads
(12) Stop/Cancel Pad:
(2)
(13) Start Pad:
(3)
NOTE:
If an operation is set and Start Pad is not
pressed, after 6 minutes, the oven will
automatically cancel the operation. This
display will revert back to clock mode.
(11)

Beep Sound:

(13)
A beep sounds when a Pad is pressed. If
this beep does not sound, the setting is
incorrect. When the oven changes from
one function to another, two beeps sound.
After completion of cooking, five beeps
sound.
Programs Pad
Before cooking: one press clears your
instructions.
During cooking: one press temporarily
stops the cooking program. Another press
cancels all your instructions and the time
of day will appear in the display.
Press to start operating the oven. If during
cooking the door is opened or Stop/
Cancel Pad is pressed once, Start Pad
has to be pressed again to continue
cooking.