Control Panel Nn-Gd452W/Nn-Gd462M; Beep Sound - Panasonic NN-GD452W Bedienungsanleitung

Control panel NN-GD452W/NN-GD462M *

2
5
8
10
11
14
Note
If an operation is set and start button is not
pressed, after 6 minutes the oven will
automatically cancel the operation. The
display will revert back to clock mode.
1 Display window
2 Microwave power levels button
3 Grill button
4 Turbo defrost programs button
5 Auto sensor reheat programs button
1 6 Auto sensor cook vegetables /
sh programs button
7 Auto sensor cook rice / pasta
programs button
8 Auto weight Panacrunch
4
programs button
3
9 More / less button
10 Time / Weight selection dial
7
11 Memory button
6
12 Timer button
13 Clock button
14 Stop /Cancel button:
9
Before Cooking:
One press clears your instructions
During Cooking:
One press temporarily stops the cooking
program. Another press cancels all
your instructions and the time of day will
appear in the display.
15 Start button
16 Door Release button
13
This oven is equipped with an energy
saving function.
12
* The design of your control panel may
vary from the panel displayed (depending
15
on colour), but the words on the panel
will be the same.
Please note
1. When in stand-by mode the brightness
16
of the display will be reduced.
2. The oven will enter stand-by mode,
when rst plugged in and immediately
after the last operation has completed.

Beep sound

When a button is pressed correctly a beep
will be heard. If a button is pressed and no
beep is heard, the unit has not or cannot
accept the instruction. At the end of any
complete program, the oven will beep 5
times.
14
EN