Sony MDM-X4 Bedienungsanleitung Seite 30

Recording
Preparations
1
3
2,6
1
Press down the INPUT switches on channels 1~4.
(Set channels 1~4 to receive the (TRACK) sound
played back from the recorder.)
2
Set the faders for channels 1~4 to about 7 or 8.
3
Set the ASSIGN switches and PAN knobs for
channels 1~4 to direct the sound to tracks 1 and 2.
(Set the playback sounds input from the recorder
to channels 1~4 to be recorded on tracks 1 and 2.)
4
Prepare the monitor.
• Press the monitor track key corresponding to
the group path selected in step 3 (In this case,
press 1-2).
• Turn the MONITOR knob and the TRACK
knob(s) to adjust the sound to a level that can be
monitored.
5
Press ( PLAY.
Playback begins.
6
Use the faders for channels 1~4 to adjust the
record balance of the sound to be recorded on
tracks 1 and 2.
You may also need to adjust the monitor balance
at this time.
Press the p STOP key after making the necessary
adjustments.
7
Turn the jog dial to locate the point on the counter
where the recording will begin.
8
Press the REC SELECT key for tracks 1 and 2.
This makes it possible to record on tracks 1 and 2.
30 EN
Recording
1
Press REC.
The unit switches to record pause mode.
2
Press ( PLAY.
8
Recording begins.
4
Play together with the previously recorded
performance.
7
3
When you've finished playing, press p STOP.
5
Checking the Recording
1
Turn the jog dial to set the counter to the point
you want to hear.
2
Press CUE to prepare for monitoring.
Adjust the monitor volume using the respective
TRACK knobs and the MONITOR knob.
3
Press ( PLAY.
Playback begins.