07/2017
1018446-00
4.10
–
Removing the canopy panel: see page 44.
The following components listed in the maintenance plan are fitted in the
canopy:
UV low pressure lamps
Low pressure lamps
Facial tanner low pressure lamps and the associated starters
Facial tanner high pressure lamps
Facial tanner filter panels
–
Please maintain the correct order of the SMART SUN lamps and UV low
pressure lamps.
a1: UV low pressure lamps
a2: SMART SUNLow pressure lamps
18286 / 0
These devices have 2 SMART SUN low pressure lamps in the facial tanner.
The facial tanner's low pressure lamps must be removed first so that the high
pressure lamps can be changed.
–
Remove the lamps.
–
Remove the two upper low pressure lamps in the canopy so that you can
then access the facial tanner's low pressure lamp starter.
Replacing lamps: see page 48.
Replacing starters: see page 49.
High pressure lamps and filter panels: see page 50.
Cleaning or replacing lamps and filter
panels in the canopy
Cleaning and maintenance
Operating instructions – 53/64