switel BCF 807 Bedienungsanleitung Seite 4

Wireless monitor system BCF 807
Monitor Camera
8 1
14
9
2
3
10
11 4
5
6
7
15
12
13
17
18
Charger
20
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
 Risk of explosion!
 Only use the power adapter plugs supplied!
 Only use batteries supplied or ones of the same type!
 Always treat batteries with due care and attention and only use
batteries as described.
 Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
 Risk of suffocation through small objects, packaging and protective foil!
 Keep children away from the product and its packaging!
 Risks to health and the environment from batteries!
 Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
 Never use the units in the vicinity of medical equipment. Effects on
such equipment cannot be fully ruled out. Please observe a minimal
distance of 2.5m to sources of interference such as televisions or
computer screens.
ATTENTION!
 This device is not a complete replacement for the personal supervision
of your baby or toddler.
 Prevent exposure to environmental influences, e.g. smoke, dust,
vibration, chemicals, moisture, heat and direct sunlight.
 Only allow repairs to be completed by qualified personnel.
 Remove the batteries during long period of non-use.
PACKAGE CONTENTS
1 Camera unit, 1 Monitor unit, 1 Charger, 2 Power adapter plug, 1 Rechar-
geable battery, 1 Operating instruction
OPERATING ELEMENTS
1 Push-to-Talk Button (Press and hold to talk with the baby. Release to
listen to the baby again)
2 Power and LCD ON/OFF
3 " + " Selection Button
4 MENU Control Button
5 Power LED
6 Microphone
7 DC Power Input Jack
8 Sound Bar
9 VOX Control Switch
ON = Camera only transmits a noise over 50dB
OFF = Camera transmits continuously
10 " - " Selection Button
11 Speaker
12 DC Power Input Jack
13 Charger Indicating LED
14 Power LED
15 Light Sensor
16 Camera LENS
17 "LINK" Pairing Button
18 Power ON/OFF
19 Microphone
20 DC Power Input Jack
16
ICONS IN THE DISPLAY
Indicating connection signal strength between the Camera and
19
Monitor units
Indicating battery capacity of the Monitor unit (Battery Icon)
STARTING UP
 Insert the batterie.
The batteries or Unit could be damaged. Pay attention that the batte-
ries are inserted correctly. Switch the unit off before removing the battery
compartment cover. Only switch it on again when the battery compartment
cover has been replaced.
Connecting the power adapter plug
 Connect the cable of the power adaptors to the units (12 / 20).
 Connect the power adaptors in a properly installed mains power
outlet
Charging the batteries
 Charge the battery for at least 8 hours when charging for the first
time and ensure it is subsequently discharged and charged fully.
This aids a long service life of the battery.
 Place the monitor unit in the charger.
Turn ON the units
 Button (2 and 18) to „ON". Picture and sound will be transmitted.
 Button (2) to „LCD OFF". Only sound will be transmitted.
INFRARED NIGHT VISION (Automatic)
 The infrared night vision allow the camera to pick up pictures during
darkness or periods of very low levels of light. In this mode only black
and white image will be displayed on the monitor and only objects
placed within 6ft / 2m will be monitored.
MANUAL SET-UP
Press the MENU control button (4) to pull down the menu bar. Move the
high-lighting bar up and down the menu by using the " - " and " + " selec-
tion buttons. Press MENU control button to confirm the selected function
you need to adjust.
 Use the " - " and " + " selection buttons to adjust the function selected.
 VOX Sensitivity Level setup for the Camera unit (LO / MID / HI).
 Brightness control on the Monitor unit.
 Volume control for the Camera unit.
 Select EXIT and press MENU to exit.
 Use the " - " and " + " selection buttons to control the sound level of the
Monitor unit directly.
Manual connection of the camera and monitor
You can pair the Monitor and Camera units when necessary by the
following steps:
 Turn ON Monitor and Camera unit.
 On the Monitor: Press and hold the " - " and " + " selection buttons
together until its power LED (5) starts blinking.
 On the Camera: Press the LINK (17) button with a small pin until the
power LED (14) starts blinking.
The system will complete the matching process automatically. The monitor
will display the image transmitted from the camera if properly linked.
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply when a device malfunction was
caused by the mobile telecommunications network operator/provider. The
terms of guarantee do not apply to the batteries or power packs used in the
products. The period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the period
of guarantee will be redressed free of charge. Rights to claims under the
terms of guarantee are annulled following tampering by the purchaser
or third parties. Damage caused as the result of improper handling or
operation, normal wear and tear, incorrect positioning or storage, improper
connection or installation or Acts of God and other external influences
are excluded from the terms of guarantee. In the case of complaints, we
reserve the right to repair defective parts, replace them or replace the
entire device. Replaced parts or devices become our property. Rights
to compensation in the case of damage are excluded where there is no
evidence of intent or gross negligence by the manufacturer. If your device
does show signs of a defect within the period of guarantee, please contact
the sales outlet where you purchased the SWITEL device, producing the
purchase receipt as evidence. All claims under the terms of guarantee in
accordance with this agreement can only be asserted at the sales outlet.
No claims under the terms of guarantee can be asserted after a period of
two years from the date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed
of in normal domestic waste and that they must be brought to collection
points provided by local public waste authorities. Packaging materials must
be disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.switel.com.
Technical data (All rights reserved)
Feature Value
BCF 807 Operating range: outdoor 250 m
W x H x D (camera) 68 x 100 x 50 mm
W x H x D (monitor) 60 x 100 x 17 mm (without charger)
Weight (camera) 84 g
Weight (monitor) 91 g (incl. battery, without charger)
Frequency 2,4 GHz Digital (FHSS)
Battery (monitor) 3,7 V 1200 mAh Li-ion
Power adaptor plug
Using the energy-efficient power adaptor model for camera unit, monitor
and charger S003GV0600050 (input AC 100-240V ~50-60Hz, output DC
6V/400mA)