Herunterladen Diese Seite drucken

G&D RS232 Bedienungsanleitung Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Guntermann & Drunck GmbH
Installation and operating manual
for RS232 extenders
115.200 bit/s (57.600bit/s slow mode)
full RS232C:
TxD, RxD, RTS, CTS, DTR, DSR, RI, DCD
up to 50V potential difference between
transmitter and receiver (only signal lines,
shield must be isolated in the cable where
applicable)
The
jumper "A" reduces the data rate
to 60% when used ("Slow Mode") which
means that slightly longer cables lengths can
be used. It is essential that the same
configuration is set on
sides in this case!
5VDC, external power supply unit, minimum of
300 mA, regulated
less than 100 mA (per device), conforms to
approx. 0.5W
W=55 mm, H=24 mm, L=104 mm
depending on cable quality, approx. 200m or
longer
Operation:
5-45°C,
Rel. air humidity: <80%; non-condensing;
Storage:
10-55°C,
Air humidity: <85%
Page 8
Version 1.00

Werbung

loading