Copying Configuration Data; Copying Individual Values; 8.12.2 Copying All Values - AKG DMM8 U Bedienungsanleitung

operAting the Device
Copy
configurations
DMM8 MANUAL
8.12

Copying configuration data

The copy function can be used to copy individual or multiple settings
(LEVEL, TREBLE, BASS, LOWCUT, LIMITER and COMPRESSOR) on an
input to one or more other inputs.

8.12.1 Copying individual values

To copy individual values from one channel to one or more other channels,
proceed as follows:
Step Description
Select the required function on the SYSTEM CONTROL rotary
1
knob
2 Press the rotary knob with the value to be copied, then
straight away press the rotary knob up to which the copy
process is to be carried out
3 Keep both rotary knobs pressed down (approx. 4 seconds)
until an acoustic signal is sounded (beep) and the affected
LED rings flash once briefly.
•
The copying process is applied to all rotary knobs that located between the
two selected knobs.

8.12.2 Copying all values

To copy all values from one channel to one or more other channels, proceed
as follows:
Step Description
1 Press the rotary knob with the values to be copied, then
straight away press the rotary knob up to which the copy
process is to be carried out
Value was transmitted to the selected channels.
125