Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

14. by any person who has ingested any alcohol or drug that could impair their ability to
operate the E-SCOOTER.
15. without 2 hands on the handle bar.
16. while not seated on the seat.
17. to jump ramps, curbs, or objects or attempt any stunts.
18. with excessive speed for the terrain, circumstances or maneuver with clothing or
extremities in close proximity to the drive chain or any moving parts.
19. beyond your ability or prior experience.
20. by stopping with only the front brake. Use both brakes simultaneously.
21. Do not try to accelerate and have the brake (s) on at the same time.
[This may cause damage to the motor or drive train or cause the motor or drive train to
overheat.]

BEFORE EACH RIDE:

CAUTION
1. Make sure you properly wear a helmet.
2. Wear protective clothing and gloves.
3. Wear eye protection that does not interfere with your
peripheral vision.
4. Check local and state laws before operating the E-SCOOTER in any area.
5. Make sure all tail/brake lights, turn signals and headlight are operational.
6. Make sure the horn is operational.
7. Make sure the brakes are properly adjusted and working correctly
(see further detailed instructions).
8. Make sure you understand how the brakes work and that your hands can reach and
squeeze the levers comfortably and hard enough to stop the E-SCOOTER safely.
9. Make sure all parts of the E-SCOOTER are properly and securely fastened and adjusted,
including but not limited to crank arms, wheels, all controls and cargo (Please refer to
Assembly Instructions).
10. Make sure the tires are not excessively worn, do not have tears or cuts, and are proper-
ly seated on the rim and inflated to the proper pressure on the sidewall (DO NOT USE GAS
STATION PUMPS FOR INFLATION).
11. Make sure the wheels spin straight and that the rims are not bent or damaged (front
wheel must be undamaged for front brake to work properly).
12. Make sure the throttle is in the „OFF" position before turning E-SCOOTER key on.
This will prevent the E-SCOOTER from moving forward without notice once the ignition key
is turned.
13. Make sure the "Air Switch" under the seat is in the 'On" position before turning key on.
3
4
SXT-SCOOTERS

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Raptor 1200

Inhaltsverzeichnis