Storage Box - SXT-Scooters Gekko 1200 Handbuch

FRONT PANEL E-SCOOTER
Locate the front panel and connect the head light
wire plug to the correspondent plug at the front
of the scooter as shown on the picture. Insert the
plastic fins of the front panel at the corresponding
channels of the base (see the picture) and slide
it upwards until the holes of the back black cover
match the screw holes of the cover. Insert the
screws into the holes of the black back cover and
screw them onto the front cover.
E-SCOOTER
Locate the front panel and connect the head light
wire plug to the correspondent plug at the front
of the bike as shown on the picture. Locate the
front hole in the middle of the panel and use the
included short bolt to attach it to the body. Locate
all attachment points of the cover, insert the screws
into the holes of the black cover and screw them
onto the front cover.

STORAGE BOX

Locate the storage box and the hardware neces-
sary to mount it on the back of the Scooter. Mount
the scooter rack using the bolts and the nuts in the
package. Install the box on the top of the rack
using the metal bracket and bolts.
3
GENERAL SAFETY GUIDELINES & RESTRICTIONS 7 SXT-SCOOTERS