Rearview Mirrors - SXT-Scooters Gekko 1200 Handbuch

REARVIEW MIRRORS

REARVIEW MIRRORS
Locate the mirrors included with your E-
SCOOTER .Connect the three wires of the
mirrors to the same color wires coming out of
the mirror holes. Use a hexagonal („Allen" or
„Hex" wrench) to attach the mirrors as shown
in the pictures. Make sure you use the included
spacer under the mirror base if necessary. Then
screw the bolt onto the threaded ends as shown
on picture below.
When you are sitting on the scooter you can
adjust the mirrors by pushing the mirror surface
up, down, left and right.
Different Operating for assembly the Mirrors
for different scooter.
The mirror needs to be tightened fully for
assembly to be safe. Repeat the process for the
other mirrors. Once mirrors are installed, they
should look like the picture below. Make sure
to adjust the mirrors before use. so that you
can see behind you as you ride.
8
REARVIEW MIRRORS SXT-SCOOTERS