Technical Instructions - SXT-Scooters Gekko 1200 Handbuch

TECHNICAL INSTRUCTIONS

The scooters driving system consist of four
main components:
• Battery
• Controller
• Throttle
• Motor
When the throttle is twisted, a signal goes
to the controller, relevant to the angle of
turning. Then the controller draws from the
battery current, relevant to the required
speed, controlled by the throttle and the
power necessary to start the scooter or drive
it uphill.
The higher the driving speed is and the
steeper the hill is, the lower the range of the
E-SCOOTER is. The main breaker under the
seat works as a high current protector. 60V
DC to 12V DC invertors inverts the voltage to
12V. All light bulbs work on 12V.
The alarm works on 60V. It is vibration
sensitive.
No matter that it consumes very little amount
of power, it is recommen-ded when the
E-SCOOTER is stored for a long period of
time the main breaker to be turned OFF.
22
TECHNICAL INSTRUCTION SXT-SCOOTERS