First Ride - SXT-Scooters SXT MONSTER Benutzerhandbuch

E

First ride

1. Carefully unpack your SXT scooter and remove any packaging material attached to the scooter.
2. Install the Parts which are explained on Page 9 (Assembly of scooter)
When connecting the battery and control unit or when inserting the blade fuse, sparking may occur.
This is normaly and not a cause for concern.
3. Make sure all screws on the scooter are tight.
4. Fully charge your SXT scooter.
Wichtige Hinweise Commissioning
3 0 3 0