Specification - Hitachi UC 18YKL Anleitung

English

SPECIFICATION

CHARGER
Charging time
Charging voltage
Weight
APPLICATION
For charging the HITACHI BATTERY
○ EB712S, EB7S, EB714S, FEB7S, EB7B, BCC912,
EB912S, EB9S, EB914S, EB914, FEB9S, EB9B,
EB924, EB926H,
EB1212S, EB12S,
EB12B, EB1220BL, EB1224, BCH1215, BCH1220,
EB1226HL, EB1230H, EB1230HL, EB1230X, EB1233X,
BCC1412, EB1412S,
EB1424, BCH1415, BCH1420, EB1426H, EB1430H,
EB1430X, EB1433X, BCL1415, BCL1430, EBL1430,
EB1812S, BCC1812, EB1814SL, EB18B, EB1820,
EB1820L, EB1824L, BCH1815, BCH1820, EB1826HL,
EB1830H, EB1830HL, EB1830X, EB1833X, BCL1815,
EBM1830
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's
receptacle.
Table 1
Before
charging
While
charging
Pilot lamp
Charging
(red)
complete
Overheat
standby
(2) Regarding the temperature of the rechargeable battery.
The temperatures for rechargeable batteries are as shown in the table below, and batteries that have become hot
should be cooled for a while before being recharged.
Table 2
Rechargeable batteries
EB712S, EB7S, EB714S, FEB7S, EB7B, BCC912,
EB912S, EB9S, EB914S, EB914, FEB9S, EB9B, EB924,
BCC1212, EB1212S, EB12S, EB1214S, EB1214L,
FEB12S, EB12B, EB1220BL, EB1224, BCC1412,
EB1412S, EB1414S, EB1414, EB14B, EB1424, BCC1812,
EB1812S, EB1814SL, EB18B, EB1820, EB1820L,
EB1824L
EB926H, EB930H, EB933X, BCH1215, BCH1220,
EB1226HL, EB1230H, EB1230HL, EB1230X, EB1233X,
BCH1415, BCH1420, EB1426H, EB1430H, EB1430X,
EB1433X, BCH1815, BCH1820, EB1826HL, EB1830H,
EB1830HL, EB1830X, EB1833X
BCL1415, BCL1430, EBL1430, BCL1815, EBM1830
10
EB930H, EB933X, BCC1212,
EB1214S, EB1214L, FEB12S,
EB1414S, EB1414,
power cord
Indications of the pilot lamp
Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Lights Lights continuously
Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Blinks Lights for 1 second. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Approx. 50 – 120 minutes
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At 1-second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 1.
CAUTION
If the batteries are inserted in the reverse direction, not
only recharging will become impossible, but it may also
EB14B,
cause problems in the charger such as a deformed
recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals). (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
to the
the rechargeable battery.
Temperatures at which the battery can be recharged
7.2 – 18 V
0.4 kg
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
–5°C - 55°C
–5°C - 50°C
0°C - 50°C