Introduction; Safety; Safety Instructions; Conditions Effecting Safety - Fohhn EASYSAT Mini Bedienungsanleitung

1. Introduction

EasySat systems are high-quality sound systems that meet the
varied requirements of the user. Sound can be generated with
minimal effort, both in mobile and stationary applications. The
ease of operation of this professional concept means that it can
be used by every musician without any special previous
experience. The practical controls and robust housing provide
the user with support in every area of application.

2. Safety

2.1. Safety instructions

1. This equipment is built and tested in accordance with VDE
protective measures for electronic equipment safety. It
leaves the factory 100% technically safe. In order to
maintain this and guarantee safe operation, please observe
both the standard general safety precautions and the
instructions and warnings included in these user
instructions.
2. The equipment meets the standards of the EMC
(electromagnetic compatibility) law that currently apply.
This is certified by the CE mark affixed to the equipment.
3. The equipment does not contain parts that can be repaired
by the user. To avoid the danger or fire or electric shocks,
do not open the housing and employ a qualified technician
to carry out any repairs.
4. Loud bass can damage your hearing! Never remain directly
in front of an active speaker. Try to avoid feedback.

2.2. Conditions effecting safety

If the unit
• shows visible damage,
• contains loose parts,
• no longer functions correctly,
• has been stored for a long period in unfavourable
conditions (e.g. in the open air or in damp rooms) or
• has been damaged during transit
(e.g. in unsuitable packaging),
this may effect safety. Decommission the unit and label it as
being unsafe for use.
Secure the unit in such a way that it cannot be operated
unintentionally by third parties.

3. Scope of delivery

Your EasySat system consists of the following components:
EasySat Mini:
1. 2x FH08 mid-high speakers
-Mini
2. 1x FB08 subwoofer
-FX
(FX = integral passive crossover)
EasySat Entertainer:
1. 2x FH1 mid-high speakers
-Entertainer
2. 1x FB08 subwoofer
-FX
(FX = integral passive crossover)
EasySat Combo:
1. 2x FH3 mid-high speakers
-Combo
2. 1x FB3 subwoofer
-FX
(FX = integral passive crossover)
EasySat Top-Fourty:
1. 2x FH3 ND
-Top40
2. 2x FB4 subwoofers
-FX
(FX = integral passive crossover)
Please check that the package contains all the parts relevant to
the respective system. Should any parts be missing, please
consult your Fohhn dealer.

4. Description

4.1. General

Plug & Play - EasySat Systeme
EasySat systems are passive systems. Only a standard power
mixer or a stereo amplifier is required to operate the bass and
satellite speakers (mid-high speakers). The power mixer and the
stereo amplifier are both connected to the subwoofers via two
Speakon cables (configuration 1+/1-). Each satellite speaker is
also connected to the subwoofer via a Speakon cable
(configuration 1+/1-). The integral crossover electronics do the
rest for you. Subwoofers and satellite speakers are therefore
perfectly balanced. You require 2-wire Speakon cables.
The satellite speakers can also be connected to a power mixer
without a subwoofer.
The optional FCï3PRO controller, 19" 1 HE, protects the entire
system. (See brief description on page 4)

4.2. Recommended accessories

EasySat Systeme
• Transport covers for the speakers, padded
• Carry bag for 2x stands
• Speaker stands
• Distance pipe, M20 thread
• SHM1 stand fork for FH08-Mini
• VT-3 stand fork for FH3 ND-Top40
• FC•3PRO controller, 19" 1 HE
mid-high speakers
7