Commissioning; Operating Conditions; Audio Connections; Operating Instructions - Fohhn EASYSAT Mini Bedienungsanleitung

5. Commissioning

5.1. Operating conditions

1. The permitted ambient temperature during operation is
between -5°C and +4°C.
2. The unit may be stored or transported at a temperature of
between -15°C and +40°C.
3. If during transport or storage, dew forms on the unit, in
particular on the back panel, leave it to acclimatize for
approx. 2 hours before using it.
4. The speaker should be operated in a dry environment with
normal dust and moisture levels in the air. Do not expose
the unit to aggressive chemical liquids or vapors.
5. The unit can be set up in any position. Please make sure
that the point of sound output on the subwoofers is kept
free.

5.2. Audio connections

1. Connect the speaker outputs from the amplifier or the
power mixer to Speakon jacks (3)+(4) on the rear of the
subwoofer.
2. Connect the satellite speakers to speaker outputs (5)+(6) on
the subwoofer.
3. Check switch position (7) before switching on the
amplifier.
4. Switch the amplifier or the power mixer on.
!
Wrongly connected audio cables cause the
connected amplifiers switch off!
!
Bridge-connected amplifiers should not be
connected up.

6. Operating instructions

6.1. Installing the EasySat systems
In order to attain the most balanced sound possible and ensure
that speech can be understood in the back row at the venue, the
satellite speakers must be mounted as high up as possible. You
will require speaker stands for this.The satellite speakers should
be easily visible from every seat and standing space. People or
objects should not absorb the sound from the satellite speakers.
The SHM1 and VT-3 swivel stand are also available to face the
speakers in an optimized direction. The speaker stand and the
stand fork mean that the speaker can be raised and directed
downwards towards the audience.
It may help to think of the satellite speakers as headlights that
shine on every member of the audience.
When using the speaker as a ground monitor, lay it on the
chamfered side panel in order to face the FH08-Mini, FH1-
Entertainer or the FH3 ND-Top40 in an optimized direction.

6.2. Avoiding acoustic feedback

Operating with a microphone can cause acoustic feedback,
where the speaker produces shrill whistles.To avoid feedback:
1. Make sure that the microphone is as far behind or away
from the speakers as possible in order to avoid feedback.
2. Avoid directing the head of the microphone towards the
speakers.
3. Avoid covering the head of the microphone with your
hand.
4. If the speaker still whistles, turn down the microphone
volume at the mixing desk until the whistling stops.

7. Cleaning

Use a damp cloth to remove dust from the speaker housing.
9