Introduction; Safety + Environment; Safety Information; Precautions - Fohhn Xperience I Bedienungsanleitung

1. Introduction

Congratulations on purchasing the Xperience III Active System
from Fohhn Audio. Nowadays, small to medium-sized events held by
one person - whether they be a musician, entertainer DJ or sound
technician - require a reliable sound system that can be set up in
no time at all. Setup, plug in and let the show begin! The system
must produce good-quality sound immediately, whether it be
background music, a presentation, tannoy announcements or loud
music in a party atmosphere. The demand for good sound quality
and versatility has increased significantly here.
With these high demands in mind, we have developed and
consistently implemented the digital Xperience active speaker
system to help run your events with as little effort as possible.
Read the instructions carefully before using the equipment to
ensure that your Fohhn speaker system performs to its full capacity
and operates perfectly.
The self-powered ubs XS-1 and XS-2:
The XS-1 and XS-2 are similar Subs. The only difference are the
internal sound, limiter and compressor presets. They are optimized
to their appropriate Tops.
The passive Sub XSP-2 (slave):
The additional passive Sub XSP-2 has got the same dimensions and
the similar acoustic design as well as the self-powered Subs XS-1/2.
This additional passive Sub can be connected to the self-powered
Subs XS-1/2, giving an added 6 dB of Power!
The XSP-2 is equipped with a built-in passive crossover.
2. Safety and envronment

2.1 Safety information

1. This device has been manufactured and tested in accordance
with the German VDE safety guidelines for electronic
equipment. It has left the factory in perfectly safe condition.
In order to maintain safety and avoid risks of damage or
injury, take the usual precautions and follow all safety
instructions in the manual.
2. This device conforms to the German Class 1 safety standards.
When properly installed, all exposed metal parts are
permanently connected to safety ground. For safety reasons,
connect the equipment to a standard three-pin outlet with
protective ground only. Never open the safety ground
connection.
3. This device conforms to the EMC legislation currently in force
as certified by the CE mark on the device.
4. This device contains no user serviceable parts. To reduce the
risk of fire or electric shock, do not open the device and refer
servicing to qualified personnel.
5. Make sure to dispose of used batteries conforming to local
waste disposal rules. Never throw batteries into the fire (risk
of explosion).
16

2.2 Potential Risks

If the equipment
•
is visibly damaged;
•
contains loose parts;
•
does not operate correctly;
•
has been stored under adverse conditions (e.g., outdoors or in
a damp room) for extended periods of time; or
•
was exposed to high transportation stress (e.g., due to
inadequate packaging),
operating the equipment may be unsafe. Switch power to the
equipment off and mark the equipment.
Make sure the equipment cannot be connected to power or
switched on unintentionally by third persons.

2.3 Environment

When you dispose of the unit, separate the housing, electronic
circuit and cables and dispose of all components as per applicable
disposal regulations.

3. Unpacking

Your Xperience I Media comprises the following components:
1. 1x Xperience Sub XS-1 (selfpowered)
2. 1x IEC-cable with Powercon connector
3. 2-6x Xperience Top XT-1
4. Opional: 1x Xperience Sub XSP-2 (slave)
Your Xperience II comprises the following components:
1. 1x Xperience Sub XS-2 (selfpowered)
2. 1x IEC-cable with Powercon connector
3. 2-4x Xperience Top XT-2
4. Opional: 1x Xperience Sub XSP-2 (slave)
Please check that the package contains all components of the
system you ordered. If anything is missing, please contact your
Fohhn dealer immediately.

4. Cleaning

You can clean the loudspeaker enclosure with a moistened cloth.
Make sure that liquid will not penetrate into the case.