Ddr Dimm Modules: Ddr1-2 - Biostar P4SFA Bedienungsanleitung

DDR DIMM Modules: DDR1-2

DRAM Access Time: 2.5V Unbuffered DDR 200/266/Fuzzy 333 MHz Type
required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
DIMM Socket
Location
DDR 1 64MB/128MB/256MB/512MB/1GB
DDR 2 64MB/128MB/256MB/512MB/1GB
＊ The list shown above for DRAM configuration is only for reference.
How to install a DIMM Module
DDR DIMM Module
1. The DIMM socket has a " Plastic
Safety Tab", and the DIMM memory
module has an "Asymmetrical notch", so
the DIMM memory module can only fit
into the slot in one direction.
2. Push the tabs out. Insert the DIMM
memory modules into the socket at a
90-degree angle, then
vertically so that it will fit into the place.
3. The Mounting Holes and plastic tabs
should fit over the edge and hold the
DIMM memory modules in place.
DDR Module
*1
*1
push down
6
Total Memory
Size (MB)
Max is
2GB