Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

M
7
V
I
W
-
D
M
7
V
I
W
-
D
M
7
V
I
W
-
D
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or
fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here of without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we will not
be responsible for any mistakes found in this user's manual. All the brand and
product names are trademarks of their respective companies.
i

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Biostar M7VIW-D

  • Seite 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Seite 2: Inhaltsverzeichnis

    ENGLISH ..................... 1 M7VIW-D Features ......................1 Package contents ......................2 Layout of M7VIW-D ......................3 CPU Installation ......................4 DDR DIMM Modules: DDR1-2 ..................5 Jumpers, Headers, Connectors & Slots ................ 6 ESPAÑOL ....................12 Características del M7VIW-D..................12 Contenidos del Paquete ....................
  • Seite 3: English

    English M7VIW-D Features ® Supports single Socket-A for an AMD Athlon/ Duron Family processor. Running at 200/ 266 MHz Front Side Bus. Chipset North Bridge: VIA KT266A. South Bridge: VT8235. Main Memory Supports up to 2 DDR devices. Supports 200/ 266 MHz (without ECC) DDR devices.
  • Seite 4: Package Contents

    BIOS AWARD legal Bios. Supports APM1.2. Supports ACPI. Supports USB Function. Operating System Offers the highest performance for Windows NT, Window 98SE, Windows 2000, Windows Me, Windows XP and LINUX. Dimensions ATX Form Factor: 20cm X 30.5cm (W X L). Package contents HDD Cable X 1 FDD Cable X 1...
  • Seite 5: Layout Of M7Viw-D

    Layout of M7VIW-D JKBV1 JUSBV1 KT266A JATXPWR1 JGAME1 JAUDIO1 IDE1 IDE2 AGP SLOT LAN Chip BAT1 PCI1 PCI SLOT PCI2 PCI SLOT JUSB2 Codec PCI3 VT8235 JCMOS1 PCI SLOT JUSB3 PCI4 JUSBV2 JCI1 PCI SLOT ITE I/O PCI5 FDD1 PCI SLOT...
  • Seite 6: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. Press the lever down.
  • Seite 7: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket DDR Module Total Memory Location Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB Max is...
  • Seite 8: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 16-bit Enhanced IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/ 66/ 100/ 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives.
  • Seite 9 Wake On LAN Header: JWOL1 Ground Wake up 5V_SB JWOL1 Front USB Header: JUSB2/3 Pin Assignment Pin Assignment Data (-) Data (-) Data (+) Data (+) JUSB2/ 3 Ground Ground 5V/ 5VSB Selection for USB/KB: JUSBV1/JUSBV2/ JKBV1 JUSBV1/2 JKBV1 Pin 1-2 on ==> 5V (For Normal Function) Pin 2-3 on ==>...
  • Seite 10 CPU Clock Selection: JCLK1 Pin 1-2 ==> 133 MHz (default) Pin 2-3 ==> 100 Mhz JCLK1 Audio Subsystem: JAUDIO1/ JCDIN1/ JCDIN2 • JAUDIO1 with 14 pins only support Codec 6CH, CMI9739A/ 9760 (Optional) JAUDIO1 (Front Audio Header) JCDIN2 (CD-ROM Audio-In Header) JCDIN1 (CD-ROM Audio-In Header) JAUDIO1...
  • Seite 11 Front Panel Audio Connector/ Jumper Block Jumper Setting Configuration Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector. Pin11 and 12 Pin13 and 14 No jumpers Audio line out and mic in signals are installed available for front panel audio connectors.
  • Seite 12: Pin Assignment

    JAUDIO1 Assignment Assignment Mic In Ground Mic Power Audio Power RT Line Out RT Line Out Reserved LFT Line Out LFT Line Out Front Panel Audio Connector/ Jumper Block Jumper Setting Configuration Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector.
  • Seite 13 Clear CMOS Jumper: JCMOS1 JCMOS1 Assignment Normal Operation Pin 1-2 on (default) Clear CMOS Data Pin 2-3 on Case Open Connector: JCI1 JCI1 Assignment Normal Operation No jumper (default) installed Case Open Pin 1-2 on Back Panel Connectors JKBMS1 JUSBLAN1 JPRNT1 JGAME1 PS/2...
  • Seite 14: Español

    Español Características del M7VIW-D ® Soporta familia de procesadores single Socket-A para AMD Athlon/ Duron. Corriendo a 200/ 266 MHz Front Side Bus. Chipset North Bridge: VIA KT266A. South Bridge: VT8235. Memoria Principal Soporta hasta 2 dispositivos DDR. Soporta dispositivos DDR 200/ 266 MHz (sin ECC).
  • Seite 15: Contenidos Del Paquete

    BIOS AWARD legal Bios. Soporta APM1.2. Soporta ACPI. Soporta función USB. Sistemas Operativos Ofrece el más alto funcionamiento para Windows NT, Window 98SE, Windows 2000, Windows Me, Windows XP y LINUX. Dimensiones Forma de Factor ATX: 20cm X 30.5cm (W X L). Contenidos del Paquete Cable HDD X 1 Cable FDD X 1...
  • Seite 16: Disposición Del M7Viw-D

    Disposición del M7VIW-D JKBV1 JUSBV1 KT266A JATXPWR1 JGAME1 JAUDIO1 IDE1 IDE2 LAN Chip BAT1 PCI1 PCI2 JUSB2 Codec PCI3 VT8235 JCMOS1 JUSB3 PCI4 JUSBV2 JCI1 ITE I/O PCI5 FDD1 JWOL1 BIOS JPANEL1 CNR1 JSFAN1...
  • Seite 17: Instalación Del Cpu

    Instalación del CPU 1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Seite 18: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Tiempo de Acceso: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 contactos) Localización Módulo DDR Total del del Socket Tamaño de DIMM Memoria (MB) DDR 1...
  • Seite 19: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Seite 20 Cabezal Wake On LAN: JWOL1 Tierra Wake up 5V_SB WOL1 Cabezal Frontal USB: JUSB2/3 JUSB2/ 3 Contactos Asignacion Contactos Asignacion Data (-) Data (-) Data (+) Data (+) Tierra Ground 5V/ 5VSB Selección para USB/KB: JUSBV1/JUSBV2/ JKBV1 JUSBV1/2 JKBV1 Contacto 1-2 on ==> 5V (Para Funcion Normal) Contacto 2-3 on ==>...
  • Seite 21 Conector del Panel Frontal: JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Selección de Reloj del CPU: JCLK1 Contacto 1-2 ==>...
  • Seite 22 Subsistema de Audio: JAUDIO1/ JCDIN1/ JCDIN2 • JAUDIO1 con 14 contactos solamente soporta Codec 6CH, CMI9739A/ 9760 (Opcional) JAUDIO1 (Cabezal de Audio Frontal) JCDIN2 (Cabezal de Entrada de Audio CD-ROM) JCDIN1 (Cabezal de Entrada de Audio CD-ROM) JAUDIO1 Assignment Assignment Mic In Ground Audio Power...
  • Seite 23 Front Panel Audio Connector/ Jumper Block Jumper Setting Configuration Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector. Pin11 and 12 Pin13 and 14 No jumpers Audio line out and mic in signals are installed available for front panel audio connectors.
  • Seite 24 Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting Configuracion La senal de salida de linea del Audio Contacto 5 & 6 encamina al conector de la salida de linea Contacto 9 & 10 del Audio ubicado en el panel trasero. La senal de salida de linea del Audio y la senal del entrada del mic estan disponibles No jumpers...
  • Seite 25: Conectores Del Panel Trasero

    Conector de la Carcasa Abierta: JCI1 JCI1 Asignacion Operacion Normal Puente sin (default) instalar Carcasa Abierta Contacto 1-2 on Conectores del Panel Trasero JKBMS1 JUSBLAN1 JPRNT1 JGAME1 Raton LAN(Opcional) PS/2 Paralelo Puerto de Juego Teclado Salida del Entrada Entrada de COM1 COM2 Altavoz...
  • Seite 26: Deutsch

    Deutsch Merkmale des M7VIW-D ® Unterstützung für Sockel A für die AMD Athlon/ Duron-Familie Prozessor. FSB 200/266 MHz. Chipsatz Northbridge: VIA KT266A. Southbridge: VT8235. Hauptspreicher Unterstützung für zwei DDR Geräte. Unterstützung für 200/ 266 MHz (ohne ECC) DDR Geräte. Die maximale Speichergröße ist 2 GB.
  • Seite 27: Verpackungsinhalt

    BIOS Unterstützung für AWARD legal Bios. Unterstützung für APM1.2. Unterstützung für ACPI. Unterstützung für USB Funktion. Betriebsysteme Unterstützung für die am meisten verbreiteten Betriebsysteme wie Windows 2000, Windows ME, Windows XP, LINUX and SCO UNIX. Abmessungen ATX Form-Factor: 20cm X 30.5cm (W X L). Verpackungsinhalt HDD Kable X 1 FDD Kable X 1...
  • Seite 28: Layout Des M7Viw-D

    Layout des M7VIW-D JKBV1 JUSBV1 KT266A JATXPWR1 JGAME1 JAUDIO1 IDE1 IDE2 AGP SLOT LAN Chip BAT1 PCI1 PCI SLOT PCI2 PCI SLOT JUSB2 Codec PCI3 VT8235 JCMOS1 PCI SLOT JUSB3 PCI4 JUSBV2 JCI1 PCI SLOT ITE I/O PCI5 FDD1 PCI SLOT...
  • Seite 29: Installation Der Cpu

    Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU. Passen Sie Pin A mit dem weißen Punkt/der Abschnittkante zusammen und legen Sie danach die CPU ein.
  • Seite 30: Ddr-Dimm-Modules: Ddr1-2

    DDR-DIMM-Modules: DDR1-2 DRAM Zugriffszeit: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (184-Pin) DIMM-Sockel DDR-Module Speichergröße (MB)) Standort DDR 1 64MB/128MB/256MB/512MB/1GB Maxiamal is DDR 2 64MB/128MB/256MB/512MB/1GB Die obere Liste für DRAM-Konfiguration wird als Referenz gezeigt. Installation von DIMM-Modulen 1.
  • Seite 31: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Festplattenanschlüsse: IDE1 und IDE2 Das Mainboard hat einen 32-Bit Enhanced PCI IDE-Controller, der die Modi PIO 0~4, Bus Master sowie die Ultra DMA33/66/100/133- Funktion zur Verfügung stellt. Dieser ist mit zwei HDD-Anschlüssen versehen IDE1 (primär) und IDE2 (sekundär).
  • Seite 32: Cpu Frequenz Auswahl: Jclk1

    Wake On LAN Header: JWOL1 Masse Wake-Up 5V_SB Front USB Header: JUSB2/3 Pin Beschreibung Pin Beschreibung Data (-) Data (-) Data (+) Data (+) JUSB2/3 Masse Masse Kein Schlussel 5V/ 5VSB Auswahl für USB/KB: JUSBV1/JUSBV2/ JKBV1 JUSBV1/2 JKBV1 Pin 1-2 geschlossen ==> 5V (Fur Normale Funktion) Pin 2-3 geschlossen ==>...
  • Seite 33 Anschlüsse auf der Vorderseite:JPANEL1 PWR_LED ON/OFF (+) (-) HLED ==> Lautsprecheranschl. HLED ==> Festplattenanzeige ==> Reset-Taste ==> Infrarotanschl. ==> Sleep-Taste PWR_LED ==> Stromanzeige EIN/AUS ==> EIN /Ausschalttaste Audio Subsystem: JAUDIO1/ JCDIN1/ JCDIN2 • JAUDIO1 mit 14-Pins gilt für den Codec CMI9739A/ 9760 (optional) JAUDIO1 (Front Audio Header) JCDIN2...
  • Seite 34 Audio-Anschlusse fur die Vorderseite/Jumper-Block Jumper-Einstellen Konfiguration Pin 5 und 6 Audio-Out-Singals werden zu Pin 9 und 10 der Audio-Out-Anschluss an Pin11 und Pin12 Pin13 und Pin 14 der Ruckwand geleitet. Audio-Out- und Mic-In-Singals sind Kein Jumper verfugbar fur Audio-Anschlusse an der installieren Vorderseite.
  • Seite 35: Jumper Zum Cmos-Löschen : Jcmos1

    Audio-Anschlusse fur die Vorderseite/Jumper-Block Jumper-Einstellen Konfiguration Audio-Ausgang-Singals werden zu der Audio- Pin 5 und 6 Ausgang-Anschluss an der Ruckwand geleitet. Pin 9 und 10 Audio-Ausgang- und Mic-In-Singals sind verfugbar Kein Jumper fur Audio-Anschlusse an der Vorderseite. installieren Digital Audio Connector: JSPDIF1 Beschreibung VCC5 JSPDIF1...
  • Seite 36 Anschluss für Gehäuse-Öffnen: JCI1 JCI1 Beschreibung Normale Kein Jumper Operation installieren (Default) Pin 1-2 Gehause offnen geschlossen Anschlüsse auf der Rückseite JUSBLAN1 JKBMS1 JPRNT1 JGAME1 PS/2- LAN(optional) Maus Parallel Game-Port Speaker- Line-In Mic- In PS/2- COM1 COM2 Tastatur JCOM1 JCOM2...
  • Seite 37: Warpspeeder

    WarpSpeeder Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
  • Seite 38: Installation

    Installation Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish”...
  • Seite 39: Usage

    Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
  • Seite 40 This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure.
  • Seite 41 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”.
  • Seite 43 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.
  • Seite 44 “Auto-overclock button”: User can click this button and [ WarpSpeeder™ ] will set best stable performance frequency automatically. [ WarpSpeeder™ ] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [ WarpSpeeder™...
  • Seite 45 6. About Panel Click the About button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking.
  • Seite 47 Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions.
  • Seite 48: Trouble Shooting

    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on. Indicator light on keyboard does not turn on * Contact technical support PROBABLE SOLUTION...
  • Seite 49: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. Indicador de * Reemplace el cable. luz del teclado apagado.
  • Seite 50: Problemlösung

    Problemlösung MÖGLICHE URSACHE LÖSUNG Das System hat keine Spannungsversorgung. * Versichern Sie sich, dass das Stromkabel richtig Die Stromanzeige leuchtet nicht, der Lüfter im angebracht ist Inneren Stromversorgung wird nicht * Ersetzen Sie das Stromkabel eingeschaltet. Tastaturleuchten sind nicht an. * Wenden Sie sich an Ihre Kundendienststelle MÖGLICHE URSACHE LÖSUNG...
  • Seite 51 03/18/2003...

Inhaltsverzeichnis