Advanced-Menü; Cpu Configuration - Asus Rampage III Extreme Handbuch

3.5 Advanced-Menü
Die Elemente im Advanced-Menü gestatten Ihnen, die Einstellung für die CPU und
andere Systemgeräte zu ändern.
Rampage III Extreme BIOS SETUP
Extreme Tweaker Main Advanced Power Boot Tools Exit

CPU Configuration

Chipset
Onboard Devices Configuration
USB Configuration
LED Control
iROG Configuration
ROG Connect
3.5.1 CPU Configuration
In diesem Menü werden die vom BIOS automatisch erkannten CPU-bezogenen
Informationen angezeigt.
Die auf diesen Bildschirm gezeigten Elemente können je nach Prozessormodell
unterschiedlich sein.
Rampage III Extreme BIOS SETUP
Advanced
Configure advanced CPU settings
Module Version:01.04
Manufacturer:Intel
Brand String:Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
Frequency :2.80GHz
BCLK Speed :133MHz
Cache L1 :256 KB
Cache L2 :1024 KB
Cache L3 :8192 KB
Ratio Status:(Min:12, Max:22)
Ratio Actual Value:21
CPUID :106A5
CPU Ratio Setting
C1E Support
Hardware Prefetcher
Adjacent Cache Line Prefetch [Enabled]
Intel(R) Virtualization Tech [Enabled]
CPU TM Function
Execute-Disable Bit Capability [Enabled]
Scrollen Sie nach unten, um folgende Element anzuzeigen:
Intel(R) HT Technology
*Active Processor Cores
A20M
*Intel(R) SpeedStep(TM) Tech [Enabled]
*Intel(R) Turbo Mode Tech
Intel(R) C-STATE Tech
C State package limit setting [Auto]
3-22
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
[Auto]
[Enabled]
[Enabled]
[Enabled]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
[Enabled]
[All]
[Disabled]
[Enabled]
[Enabled]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Version 0261
Configure CPU.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Version 0261
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
NOTE: Please key in
ratio numbers directly
←→ Select Screen
↑↓ Select Item
F1 General Help
F10 Save and Exit
ESC Exit
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Kapitel 3: BIOS-Setup