Superio Devices - Beckhoff CB1050 Handbuch

Kapitel: BIOS-Einstellungen

4.6.3 SuperIO Devices

Onboard Serial Port 3
Onboard Serial Port 4
POWER ON Function
x KB Power ON Password
Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x RxD , TxD Active
x IR Transmission Delay
x UR2 Duplex Mode
x Use IR Pins
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
 Onboard Serial Port 3
Optionen: Disabled / 3F8/IRQ11 / 2F8/IRQ11 / 3E8/IRQ11 / 2E8/IRQ11
 Onboard Serial Port 4
Optionen: Disabled / 3F8/IRQ10 / 2F8/IRQ10 / 3E8/IRQ10 / 2E8/IRQ10
 POWER ON Function
Optionen: Password / Hot KEY / Mouse Left / Mouse Right / Any KEY / BUTTON ONLY / Keyboard 98
 KB Power ON Password
Optionen: Enter Password
 Hot Key Power ON
Optionen: Ctrl-F1 / ... / Ctrl-F12
 Onboard FDC Controller
Optionen: Enabled / Disabled
 Onboard Serial Port 1
Optionen: Disabled / 3F8/IRQ4 / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto
 Onboard Serial Port 2
Optionen: Disabled / 3F8/IRQ4 / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto
 UART Mode Select
Optionen: IrDA / ASKIR / Normal
 RxD , TxD Active
Optionen: Hi,Hi / Hi,Lo / Lo,Hi / Lo,Lo
 IR Transmission Delay
Optionen: Enabled / Disabled
 UR2 Duplex Mode
Optionen: Full / Half
Seite 60
Phoenix – AwardBIOS CMOS Setup Utility
SuperIO Device
[3E8/IRQ11]
[2E8/IRQ10]
[Hot KEY]
Enter
[Ctrl-F1]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
Hi,Lo
Enabled
Half
RxD2,TxD2
[378/IRQ7]
[Normal]
EPP1.9
3
Item Help
Beckhoff New Automation Technology CB1050
Integrated Peripherals