Setting the date/time
In order to obtain a correct display of the entries in the call list, the date and time must
be set.
•
Press the key
•
Select DATE/TIME and press
•
Set the year and press
•
Set the hour and press
•
Continue in this manner for entering the minute, day and month and each time
press
. The corresponding weekday is automatically displayed.
•
Select another menu item or exit the menu with
Setting the contrast
•
Press the key
•
Select CONTRAST ADJUST and press
•
Set the desired contrast and press
•
Select another menu item or exit the menu with
Setting the exchange code
If your telephone is connected to a telephone system, it is possible that to get an exter-
nal line, you must enter an exchange code (e.g. "0"). To be able to call back entries in
the call list "trouble-free", it can be necessary, depending on the telephone system, to
program an exchange number (as long as this is not automatically transferred by the
system - refer to the documentation for the telephone system).
This number is then automatically dialled, if entered in the telephone directory or on
the direct or quick-dial key.
•
Press the key
•
Select PABX CODE and press
•
Select the required exchange code and press
•
Select another menu item or exit the menu with
Swissvoice CP110
. The menu opens.
.
.
.
. The menu opens.
. The menu opens.
.
.
.
.
.
.
.
Swissvoice CP110
9