Settings - MACHEREY-NAGEL NANOCOLOR USB-T-Set Handbuch

3.7 Settings

With this program item, existing settings on the equipment can be checked and
edited.
The temperature and time tables are divided into two sections. In the grey-shaded
cells the temperatures and heating times are set by the manufacturer and cannot
be changed. In the white cells, the user can input his own settings, or the existing
values can be amended. The temperature values must be entered as whole
numbers; the time values in the form of hh:mm.
The "Factory Data" box contains the serial number and the software version
number.
In the "Sound" box, the periodic signal tone that is sounded at the completion of a
heating program, can be switched On or Off.
In the box "Error Log", faults or errors are recorded. This is a read-only field. The
information given can be of help in locating faults when problems arise. Using
the "Write" button, the settings on the screen can be written into the memory of
the unit.
Disposal in accordance with EU directive 2012/19/EU
In compliance with EU directive 2012/19/EU,
MACHEREY-NAGEL will accept back and dispose of the old
instrument at no cost.
ATTENTION!
It is not allowed to dispose of the instrument using muni-
cipal waste disposal services. Please contact your local
distributor.
NANOCOLOR
® USB-T-Set / 09.15
17