Receiving The Stored Stations; Storing Only The Desired Stations - Sony XR-CA670X Bedienungsanleitung

Receiving the stored stations

1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6))
on which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press either side of (SEEK) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Local Seek Mode:
If the automatic tuning stops too
frequently, press (SENS) repeatedly
until "LOCAL-ON" appears.
"LCL" indicator is displayed.
Only the stations with relatively strong
signals will be tuned in.
To cancel the local seek mode, select "LOCAL-
OFF."
Tip
If you know the frequency of the station you want to
listen to, press and hold either side of (SEEK) to
locate the approximate frequency, then press (SEEK)
repeatedly to fine adjust to the desired frequency
(manual tuning).
If FM stereo reception is poor
— Monaural Mode
During radio reception, press (SENS)
repeatedly until "MONO-ON" appears.
"MONO" indicator is displayed.
The sound improves, but becomes monaural
("ST" disappears).
To return to normal play mode, select "MONO-
OFF."
Tip
If FM broadcasts are difficult to hear, set DSO to
"OFF" (page 19).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press either side of (SEEK) to tune in
the station that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until "MEM"
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
11