The Fm Radio; Daily Operation - Block SR-200 MKII Bedienungsanleitung

The FM radio

You can enjoy your FM radio with the supplied FM and DAB + reception combination, as well as with a house
antenna or a cable connection (adapter is included). You can activate the FM radio with the remote control,
pressing the „FM" button as well as pressing "Source" on the device.
First setup:
▶ Press the key "Mode" on the remote control. The tuner will now search for the next available station
▶ If you want to save this station as favourite, press the „P" button on the remote control, use the arrow keys
to select an available memory and keep pressing „Enter" until the announcement „saved" appears. Now
you can access this station by pressing the receptive key on the remote control's numeric keypad. You are
also able to overwrite memory stations that have been stored at any time with new stations.
▶ Repeat steps 1-2 until you have stored all the desired stations or until the frequency is run through once.
You can store up to 10 stations as favourites.
▶ Please use the little yellow reception quality icon in the lower right corner of the display to align your an-
tenna optimally.

Daily operation:

▶ Start the FM radio as described above.
▶ You can recall your stored transmitter at any time using the numeric keypad of your remote control.
▶ The radio disposes of RDS, it becomes up-to-date information about the program, e.g. title, genre, etc.
(depending on the transmitter). You can get more information by pressing the „Info" button on your
remote control once or several times.
▶ By pressing the „left arrow" on the remote, you can access additional settings on the device:
Scan settings: „Only strong transmitters" - Yes / No
Audio settings: „ Mono Only" Yes / No (Select „YES" for strong-sounding stations).
▶ With the keys „Forward" and „Back" , you can switch the frequency band to the next higher or lower
available station.
45