Technical Specifications; Connector Configuration - Omnitronic UHF 101 Bedienungsanleitung

7 7 7 7 Technical Specifications

System:
Carrier frequency:
Coverage:
RF power output:
Modulation method:
Frequency response:
S/N ratio:
Selectivity:
T.H.D.:
Audio outputs:
Power supply:
Receiver:
Microphone/Pocket transmitter: 2 x 1.5 V battery, type AA
Battery life:
Dimensions, weight:
Receiver UHF-101/UHF-102:
Receiver UHF-104:
Microphone:
Pocket transmitter:
Specifications are subject to change without notice due to product improvements.

7.1 Connector configuration

UHF-101 / UHF-102 / UHF-104
Non-diversity, 1/2/4 channels
863.1 MHz / 864.8 MHz / 864.1 MHz / 863.8 MHz / 823.5 MHz /
828.1 MHz / 825.3 MHz / 830.3 MHz
60 m (with line-of-sight)
10 mW
F3F
40 Hz - 18 kHz
>105 dB
>85 dB
<0.5 % at 1 kHz
400 mV, 2.2 kΩ (XLR, bal.)
200 mV, 2.2 kΩ (6.3 mm jack, unbal.)
AC 100-240 V, 50/60 Hz, <10 W, via supplied power unit
approx. 10 hours
225 x 205 x 46 mm (WxDxH), 1.5 kg
225 x 410 x 51 mm (WxDxH), 3 kg
50 x 260 mm (DxL), 175 g
200 x 650 x 25 mm (WxDxH), 75 g
22 • EN