TIPTEL 3110 Kurzanleitung Seite 21

Making an Outgoing Call
Enter the number to be dialed by using the number keys and press the key "Phone
Register". Then select an entry from the phone register or press the key "Redialing"
and chose an entry from the call lists.
Then lift the handset and press the key "Speakerphone" or press the soft key "An-
swer" or press the "OK" key or press one of the function keys (if engaged with an ac-
count or the function "Headset" to control a passive headset).
Putting a Call on Hold
Press the soft key "Call Hold" or the R-key to put an active call on hold.
Enquiry Call
To place an enquiry call while having a phone conversation press the soft key "en-
quiry" or the "R-key". You can now use the digit keys to dial and the moment you
have entered the phone number completely you can press the "dial" soft key which
will initiate the enquiry call. As an alternative you may also use the function keys. By
pressing the soft key "Connect" your previous conversation partner will be connected
to the enquiry target..
If set up in the configuration, the phone can also connect calls by hanging up, re-
spectively by pressing the hands-free key or the functio key, which has been as-
signed with the headset function.
Transfer
For transferring a call without placing an enquiry call first while having your call, press
the soft key "Transfer" and the use the digit keys, the phone book, or the function
keys (when phones number have been assigned) for direct transfer. Then the call will
be transferred to the target number.
21