TIPTEL 3110 Kurzanleitung Seite 16

The handset as well as an optional passive headset can be connected to the jacks on
the bottom of the phone.
Initial Configuration with the Installation Assistant
When the phone is switched on for the first time the installation assistant requests all
the necessary settings for the operation of the phone.
Please select your preferred language from the select language list and store it.
If the phone recognizes a DHCP server in the network, it will automatically obtain an
IP address. If your phone cannot contact a DHCP server for any reason, your installa-
tion assistant will configure the IP settings.
Please specify next whether the SIP account settings shall be entered manually or by
the server with auto-provisioning. If you chose the server configuration you will be
requested to enter the URL of the server and (if necessary) user name and password.
In case of a manual configuration you can enter the data for the SIP account via the
phone keys.
Note:
Configuration by Web Browser
Please press the key "Menu" and then select "Status"
"OK" key when the phone is in idle state. Please enter the shown IP address in the
address bar of your browser.
To access your configuration you need user name and password. In the default set-
ting, they are admin/admin for the administrator (full access to all configurations) and
user/user for the user access (limited access to configurations).
These user names and passwords can be changed in the web configuration.
If you decide to enter the account specifications via web-
configuration, you can select "Skip".
16
"Information" or press the