Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Artikel:
Power supply:
Power consumption:
Number of control channels:
DMX-512 connection:
Sound-control:
Dimensions (LxWxH):
Fuse:
Weight:
Accessories:
EUROLITE LED Ball 30 IP66 24V
EUROLITE LED Ball 50 IP66 24V
Please note: Every information is subject to change without prior notice. 28.11.2013 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
51930450
230 V AC, 50 Hz ~
115 W
5/48
3-pin XLR
via built-in microphone
340 x 245 x 70 mm
F 1 A, 250 V
3.1 kg
Best.-Nr. 51930460
51930451
230 V AC, 50 Hz ~
240 W
5/48
3-pin XLR
via built in microphone
340 x 245 x 85 mm
F 2 A, 250 V
3.8 kg
Best.-Nr. 51930461
20/20
00080351.DOC, Version 1.3
Werbung
Inhaltsverzeichnis
