Replacing The Fuse; Technical Specifications - EuroLite TC-250 Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Number of gobos:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
OMNILUX OSD 90V/250W GY-9.5 2000h 6700K
OSRAM HSD 250/60 90V/250W GY-9.5 2000h
PHILIPS MSD250 90V/250W GY-9.5 2000h
GE CSD250/2 95V/250W GY-9.5 2000h 8500K
OMNILUX OSD 250/2 94V/250W 2000h 8000K
PHILIPS MSD250/2 90V/250W GY-9.5 2000h
SYLVANIA BA250/2 SE D 90V/250W GY-9.5
OSRAM HSD250/80 90/250W GY9.5 3000h 8000K
EUROLITE DMX Operator 192 Kanal
EUROLITE DMX Scan Control 192 Kanal
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 01.06.2007 ©
230 V AC, 50 Hz ~
575 W
3
3-pin XLR
via built-in microphone
1-7 Hz
14 dichroic + white
10 gobos, 5 beam-shapers
315 x 270 x 285 mm
7 kg
: 45° C
a
(steady state): 65° C
B
0.5 m
0.5 m
F 3.15 A, 250 V
No. 89106005
No. 89106010
No. 89106015
No. 89106100
No. 89106105
No. 89106115
No. 89106120
No. 89106210
No. 70064520
No. 70064525
No. 51860102
No. 51860110
No. 51834001
28/54 00026486.DOC, Version 1.4