roco BR 120 Bedienungsanleitung Seite 18

GB
Dynamic Braking:
The LokSound micro
mic braking. When you activate this function, it cuts
the braking distance in half. If you want to activate
dynamic braking for driving forwards, enter the value
128 for CV 136.
For driving backwards, enter the value 128 for CV 139.
If you do not want to use this function anymore, set
both values to 0.
Changes can be made to the CVs with the multi MAUS
or with other DCC control devices.
Please refer to the pertinent instruction manual
in this regard
You can find out about a range of other possible set-
tings, which are probably very rarely needed, relating
to drive speed curve, load control setting or noise
synchronization from the detailed "LokSound micro"
handbook. This can be downloaded as a .pdf docu-
ment from www.loksound.de.
12
8036231921.indd 12
CVs
CV 50 Analog mode
00 = off
CV 51 Brake mode recognition
x
x
x
x
CV63 Total Volume of all Sounds
(pay attention to the CV 121-
123 settings)
CV64 Braking Sound Threshold
(00: The higher the value, the
earlier the braking sound starts
when braking.)
CV113 Dimming for Front Light
(
15 = maximum brightness)
CV114 Dimming for Rear Light
(15 = maximum brightness)
CV121 Volume Control for the
Horn/Whistle
(maximum volume only when
the CV 63 = Value 64)
CV122 Volume Control For the
Bell
(max volume only when
the CV63 = Value 64)
CV123 Sounds and the Rest of
the Accessory Sounds
(max volume only when the
CV63 = Value 64)
Accessory Function
x
x
x
x
x x
x x
®
offers you the option of dyna-
Value
00 – 03
00
01
02
03
04
05
06
07
00 – 64
00 – 64
00 – 15
00 – 15
00 – 64
00 – 64
00 – 64
25.06.2009 12:36:59