General Safety Instructions - AXXAIR SAXX-200 Originalbetriebsanleitung

- 43 -
English
INNOVATIVE ORBITAL SOLUTIONS
User instructions:

General Safety Instructions:

WARNING! To avoid the risk of electric shock, injury or fire when using electrical equipment,
follow the following basic safety instructions. Read and follow these instructions before using the
machine. Keep these safety instructions in a safe place!
The operator should ensure his own safety and that of persons nearby when using AXXAIR welding
equipment. Consult the regulations relating to operation of this type of equipment and workplace safety so
that the appropriate safety measures can be taken.
Only qualified personnel may use this equipment; they must follow the operating instructions. Failure to
implement these safety precautions can endanger the operator and damage the equipment.
Before using this type of equipment, the operator must be well-acquainted with turning on and operating
this equipment as well as with the welding process. The operator must be aware of safety regulations in
force. It is essential that the operator is aware of the location of the emergency shutoff switch.
Prior to each use, the operator must ensure that there are no personnel in the work zone and that all
personnel (including the operator) present during arcing are wearing appropriate protective gear: safety
goggles or protective helmet, flame-resistant clothing, protective gloves, etc. Avoid wearing loose-fitting
clothing or personal accessories that can become tangled in the equipment.
There should be no draughts in the working area. A well-identified fire extinguisher must be located within
easy reach of the equipment.
To avoid all risk of fire, do not leave flammable objects or products near the work station.
Before conducting maintenance operations, disconnect the electrical power supply. Maintenance of the
electrical system must be performed by specially qualified and trained personnel.
DANGER. To avoid potential electrical shock that could lead to loss of life: obey all rules in force
related to the installation and grounding of the equipment. Never touch live parts or electrodes with bare
hands or wet gloves. Insulate yourself from the workpiece and from the ground.
Do not inhale gas and fumes emitted by the welding process.
Use ear protection or any other device to protect hearing.
WARN all nearby persons of the potential risks.
The operator must always use the recommended personal protective gear, safety goggles, gloves and
flame-resistant clothing.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363