Herunterladen Inhalt Inhalt Diese Seite drucken

Device Description; Changeover Switch For Battery Temperature - Bosch BSL 2470 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für BSL 2470:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
en
14 | BSL 2470 | Product description
3.3

Device description

3
2
1
Fig. 1:
BSL 2470
1 Running wheel
2 Charger cable with crocodile clip-on terminals
3 Curved handle
4
3
1 2
Fig. 2:
BSL 2470 control and display elements
1 Battery charge current display instrument
2 Red LED for „Mains ON" (permanently on) and „Reverse-polarity
or excess externally-supplied voltage at battery crocodile clip-on
terminals" (LED flashes)
3 Green LED for „Maximum charge voltage reached" (continuous
light)
4 Yellow LED for „Charging underway" (continuous light)
5 Two-way switch for battery nominal voltages 12 V and 24 V
6 Two-way switch for battery temperature
7 Battery under-voltage button
8 Potentiometer for adjusting the charge and start-assist currents
9 Mains switch
10 Device fuses
Where battery voltages are between 1 V and 8 V in 12 V mode
*)
or between 2 V and 16 V in 24 V mode, the under-voltage button
has to be used to start the charging process.
|
1 689 989 004
2014-01-15
10
8 9
5 6 7
*)
3.4
Note on device symbols
3.4.1
LEDs status
LED
Symbol
Red
!
Green
Yellow
!
If the yellow and green LEDs do not light up, the bat-
tery voltage is below 1 V (12 V battery) or below 2 V
(24 V battery). Battery charging does not take place
in this condition, because the polarity of the battery
connections cannot be checked.
3.4.2

Changeover switch for battery temperature

Symbol
Funktion
Battery temperature hot (> 15 °C)
Battery temperature cold (< 15 °C)
3.4.3
Recommended potentiometer settings when
charge process underway
Symbol
Recommended potentiometer settings
Pointer on potentiometer button horizontal
facing left: approx. 36 Ah battery.
A
Pointer on potentiometer button vertical
facing above: approx. 100 Ah battery.
A
A
Pointer on potentiometer button horizontal
facing right: approx. 230 Ah battery.
A
45100011/3P
Status
Function
Illuminated
BSL 2470
turned on
Flashes
Incorrect polarity,
fault or overload
Off
BSL 2470
turned off
Flashes.
Maximum charge
reached
Illuminated
Charging process
underway display
Flashes
Battery under-
voltage display
Robert Bosch GmbH

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis