Hendi 222140 Gebrauchsanweisung Seite 8

Operating instructions
Operating instructions (Model: 222140)
CAUTION: Before connecting the appliance to the power supply, check that the power supply voltage corre-
sponds with the power supply details shown on the rating label.
REMARK: There is no lock function for continuous operation for this model 222140.
Operating the appliance:
1. Ensure that the appliance is disconnected from
the power supply before assembly.
2. Connect the blending shaft/whisk to the main
unit.
3. Connect the appliance to the power supply.
4. Check that the ON/OFF button (1) is in the
released (flat) position.
5. Then, press the ON/OFF button (1). The appliance
will turn on. BE CAREFUL!
6. To turn off the appliance, release the ON/OFF
button (1).
Operating instructions (Model: 222171, 222188 & 222133)
EN
CAUTION: Before connecting the appliance to the power supply, check that the power supply voltage corre-
sponds with the power supply details shown on the rating label.
REMARK: There is lock function for continuous operation for the model 222171 & 222188.
Starting and stopping the appliance
1. Ensure that the appliance is disconnected from
the power supply before assembled.
2. Connect the blending shaft/whisk to the main
unit.
3. Connect the appliance to the power supply.
4. Check that the ON/OFF button (3) is in the
released (flat) position.
5. Press and hold the Enable button (1) first.
6. Then, press the ON/OFF button (3) at the same
time. The appliance will start up. BE CAREFUL!
7. To stop the appliance, release the ON/OFF
button (3) and the Enable button (1).
Continuous operating the appliance:
Follow steps 1 to 6 above, then:
• With the ON/OFF button (3) under "pressed" posi-
tion & move the finger that press safety button (1)
to the Lock button (4) now.
• Release the ON/OFF button (3) & the locking but-
8
ton (4) now, and the appliance will operate in a
continuous mode.
• To turn off the appliance, press and release the
ON/OFF button (3).
2
1
2
1
3
4