Crimping - HARTING 09 99 000 0888 Bedienungsanleitung

Operating instructions
Ⓑ
Operating Instructions: HARTING Four-Indent Crimp Tool / Edition 1.0

Crimping

1. Insert the crimp contact into the tool opening Ⓐ. The
locator ensures that the crimp contact is automatically
Ⓐ
positioned in the proper crimping position.
2. Insert a properly stripped wire into the crimp contact Ⓑ.
3. Press the crimp tool's handles together in order to
crimp the contact. Press the handles closed until they
automatically reopen (refer also to the ratchet lock
section on page 20).
19