Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch GDB 2200 WE Bedienungsanleitung

Maintenance and Cleaning

Before any work on the machine itself, pull the
s
mains plug.
For safe and efficient working, always keep the ma-
s
chine and the ventilation slots clean.
Clean the drill spindle 16 after finishing the work.
Spray the drill spindle and core drill bit 14 occasionally
with corrosion protection.
WARNING
This machine must be earthed.
Important instructions for connecting a new
3-pin plug.
The wires in the cable are coloured according to the
following code:
strain relief
live = brown
earth = green/yellow neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.

Environmental Protection

Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging should be
submitted for environment-friendly recycling.
These instructions are printed on recycled paper man-
ufactured without chlorine.
The plastic components are labelled for categorised
recycling.
1 609 929 C90 • (02.07) T
Service and Customer Advice
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
✆
Fax . . . . . . . . . . . . . . . . . . . +44 (0) 18 95/83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
✆
Fax . . . . . . . . . . . . . . . . . . . . . + 353 (0)1/459 8030
Australia
Robert Bosch Australia L.t.d.
RBAU/SBT2
To be fitted
1555 Centre Road
by qualified
P.O. Box 66 Clayton
professionals only
AUS-3168 Clayton/Victoria
✆
Fax . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 819 520
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆
Fax . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 82 914
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 61 029 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Dr. Gerhard Felten
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
English–5
Service . . . . . . . . . . . . . . +44 (0) 18 95/83 87 82
Advice line. . . . . . . . . . . . +44 (0) 18 95/83 87 91
Service . . . . . . . . . . . . . . . . + 353 (0)1/414 9400
. . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 804 777
. . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 86 158

Declaration of Conformity

Dr. Eckerhard Strötgen
Head of Product
Certification