Cleaning And Maintenance - Probuilder 44023 Gebrauchsanweisung

Replacing grinder discs
Press the spindle lock (e), turn the grinder upside down and
remove the outer flange (a) using the wrench provided.
Remove the grinder disk (b) from the inner flange (c), fit a
new disc and replace the outer flange.
Release the spindle lock.

Cleaning and maintenance

The grinder can be cleaned by wiping its exterior parts with
a dry cloth. Filings and dust can be removed using com-
pressed air. Do not use water for cleaning!
Never use corrosive or abrasive detergents, as they may
attack the plastic parts of the machine.
14
ENGLISH