Attaching The Front Panel - Siegenia AEROPAC Originalbetriebsanleitung

AEROPAC
Fitting the protective grid
1. Slide the protective grid into the guiding
groove on the right and on the left.
2. Press the protective grid lightly against
the rear panel. At the same time, careful-
ly lift the fastening clip and push into the
catch.

Attaching the front panel

1. Position the lower edge of the front
panel horizontally onto the lower edge
of the unit.
2. Press the front panel's two holding arms
inwards while closing the front panel at
the same time. While closing, ensure that
the edge of the front panel is resting on
the lower edge of the unit.
43
Original Operating Instruction
1.
2.
Last update: 7.2.2014