AEROPAC
Function
The low-noise AEROPAC wall-mounted ventilator uses an electrically operated blower to draw in
fresh air from the outside and provide controlled and energy-efficient fresh filtered air inside.
When the blower is switched off, the unit equalises the pressure of the indoor and outdoor air to
allow fresh air from the outside to flow inside (pressure differential principle).
Various filters may be used, depending on the intended use of the unit:
AEROPAC G3 dust filter
AEROPAC F5 dust filter
AEROPAC activated carbon filter
Features
The AEROPAC offers the following features:
• Sound absorption
• Low internal noise
• Filters dust and exhaust fume odours
• Filter change indicator
• Adjustable airflow
• Timer function
The AEROPAC wave unit type offers the following additional features:
• Device control by means of a Z-Wave wireless network
The AEROPAC DD unit type exchanges the air in a room without a blower (pressure diffe-
rential principle).
Carton contents
• AEROPAC wall-mounted ventilator with G3 dust filter
• Original Operating Instruction plus drilling template
• Mounting kit consisting of two screws, two dowels and one stopper
• Weather grill F. (made of plastic)
• PVC ventilation pipe, Ø 80 mm, 500 mm long
27
Original Operating Instruction
For coarse dust
For pollen/fine dust
E.g. exhaust fume odours
Last update: 7.2.2014