Installation; Installation Requirements - Siegenia AEROPAC Originalbetriebsanleitung

Original Operating Instruction

Installation

Installation requirements

• If the unit is to be installed in a room with a heating unit that draws air from the room (e.g. a fireplace),
prior authorisation must be obtained from the proper authorities.
• Suitable location for installation:
-- In the vicinity of a 230 V AC power connection (max. cable length: 4.5 m)
-- When a permanent mains connection is used: over a flush-mounted box
-- Not in the immediate vicinity of radiator thermostats
• On a smooth, even wall.
• Ensure that no cables or pipes are concealed inside the wall at the unit's designated position.
• Keep the unit free from dirt during installation and before start-up.
• To prevent damage to the high-quality surface of the unit, it is advisable to wear suitable gloves du-
ring the installation.
Recommended unit position
Last update: 7.2.2014
AEROPAC
28