Maintenance; Replacing The Filter - Siegenia AEROPAC Originalbetriebsanleitung

AEROPAC

Maintenance

Replacing the filter

The filter must be replaced when the air
throughput starts to diminish. The L filter
change indicator appears on the display af-
ter an operation period of six months.
Note: Filters for various uses can be found
under Accessories (see page 44).
Removing and fitting the filter
1. Switch off the unit. Depress the two mark-
ings on the top of the front panel
while pulling the panel towards you.
2. Grip the bottom of the filter frame's bar
and remove the frame from the fixing.
3. Remove the filter from the frame and in-
sert a new filter.
Note: Insert the F5 filter so that its smooth
surface is facing the holding bar.
4. Push the filter frame back into the fixing
and close the front panel until it locks
into place.
5. Press the – button for approx. 5 sec. until
the L filter change indicator disappears.
41
Original Operating Instruction
Last update: 7.2.2014