Connection Of The Monitoring Components - Renkforce MAC-608 Bedienungsanleitung

4. Alarm zone LEDs
• Switched off: The respective alarm zone is not armed (NC-Modus, normal condition)
• The alarm of this loop is triggered or alarm loop is interrupted.
Before arming, please localize the earth and overcome open contact or interruption of the alarm
loop.
• Flashing quickly: An alarm was triggered in an armed alarm zone
• Flashes slowly: Fast flashing shows that alarm was triggered in a zone. If the key switch is then put in the
„OFF" position, the LED of the affected alarm zone flashes slowly.

11. Connection of the Monitoring Components

In the delivery condition, the alarm zones in the alarm system are closed with the help of jumpers or short
circuit bridges.
29