Safety Information - Renkforce MAC-608 Bedienungsanleitung

5. Safety Information

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with
the operating instructions! We do not assume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety information. In such cases the warranty/guarantee will
expire.
Attention!
The product must only be installed by a qualified electrical specialist (e.g. electrician) who is
familiar with the relevant regulations (e.g. VDE)!
Improper work, carried out on the mains voltage, endangers not only your life but also the life
of others!
If you do not have the expertise required for installation, do not install the device yourself but
ask a specialist.
• The product must not be modified or rebuilt, as not only the CE approval will expire but also the
warranty/guarantee.
• The product must only be installed and operated in dry, closed inner rooms; it must not get
moist or wet! There is danger to life from electric shock!
• Do not use the product inside of rooms or in bad ambient conditions where flammable gases,
vapours or explosive dust may be or are present!
• The product must not be exposed to extreme temperatures, humidity, direct sunlight, intense
vibration or heavy mechanical strain.
• Handle the product with care. It has sharp corners.
• This product is not a toy and not suitable for children.
• Never let the packaging material lie around unattended. Plastic foil / bags etc. can become a
dangerous toy for children; there is a risk of suffocation.
• If you have reason to assume that safe operation is no longer possible, disconnect the device
immediately and secure it against inadvertent operation.
• Thunderstorms may be a danger for any electrical device. Overvoltage on the power line can
damage the device.
• No devices with strong electric or magnetic fields such as mobile phones, radio devices, elec-
tric engines etc. should be in the proximity of the alarm system, etc.). Direct heat sources may
also lead to functional impairment.
• Never pour out fluids above electrical devices.
• Never operate the product covered. Make sure that the device is sufficiently ventilated.
• A device for all-pin separation from the mains voltage must be provided on the installation side
(e.g. FI circuit breaker).
• Also observe the operating instructions for the products used together with this alarm system.
• Repair must only be carried out by a qualified specialist or a specialist workshop.
• If, during assembly, connection or installation, you are not sure or you have doubts about the
function of this alarm system, contact a specialist.
23