Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of The Device; Features; Installation; Setting Into Operation - EuroLite WW-40 Bedienungsanleitung

Led spot
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The maximum ambient temperature T
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

DESCRIPTION OF THE DEVICE

Features

For setting the tone!
• Three compact LED spots for innovative decoration and illumination
• For a charming illumination of fountains, gardens, balconies or terraces ...
• For indoor and outdoor, over and under water use
• Equipped with 120 LEDs - 40 per LED spot
• Housing and base made from rust-free material (plastics)
• Tiltable about 150° via base
• Power supply via included power unit and 3-way distributor
• Available in different LED colors

INSTALLATION

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
These LED spots are designed for standing installation only.
Before attaching the device, make sure that the installation area can hold a minimum point load of 5 times
the device's weight.
The device must only be installed at a vibration-free, oscilation-free and fire-resistant location.
Please refer to the instructions under Operating Determinations.
Always unplug the power plugs of all devices located in the water and of the LED spots before working on
the LED spots in the water!

Setting into operation

1. Connect the LED spots via the included 3-way distributor with the power adaptor. Tighten all union nuts.
2. Place the LED spots at the desired installation-spot.
3. Connect the transformer to the mains. Make sure that the outlet is in a dry area.
After you connected the LED spots to the mains, the LEDs start burning.
must never be exceeded.
a
DANGER OF FIRE!
9/10
00053102.DOC, Version 1.1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

833091918330919483309192

Inhaltsverzeichnis