Philips SCD484 Benutzerhandbuch Seite 2

1 Introduction
Congratulations on your purchase and welcome to Philips
AVENT! To fully benefit from the support that Philips AVENT
offers, register your product at www.philips.com/AVENT.
Philips AVENT is dedicated to producing caring and reliable
products that give parents the reassurance they need
when looking after the health and safety of their baby.
This Philips AVENT baby monitor parent unit is designed
to be used with models SCD485 and SCD486. Offering
the same features, this additional parent unit gives you the
reassurance you need to enjoy extra flexibility and freedom
when monitoring your baby in and around your home.
For details on the operation, see the User Manual for
SCD485 or SCD486.
2 Important
Read this user manual carefully before you use the baby
monitor and save the user manual for future reference.
WARNING: To prevent strangulation with the power
cord, always keep the baby unit and the power cord out
of baby's reach, at least 1 meter/3.5 feet away. Do not use
extension cords.
Caution: Risk of explosion, electric shock, short circuit,
or leakage
• The baby monitor shall not be exposed to dripping
or splashing and no objects filled with liquids, such as
vases, shall be placed on the baby monitor.
• Where the mains plug is used as the disconnect device,
the disconnect device shall remain readily operable.
• Before you connect the baby monitor to the mains,
make sure that the voltage indicated on the adapters
of the baby monitor corresponds to the local mains
voltage.
• Use the supplied adapters to connect the baby
monitor to the mains.
• To prevent electric shock, do not open the housing
of the baby unit or parent unit except for the battery
compartments.
• Make sure that your hands are dry when you insert
or replace batteries.
English
3