Setting Alarm - DNT IP-dio Bedienungsanleitung

Set Time
14:03
Set Time
15:03
Time Set:
15:06
Setting the alarm
Stations
< Confi gure >
Media Player
Register
< Clock >
Sleep Timer
Set Time
< Set Alarm >
Enable Alarm
Yes/No
Alarm is Off
Set Alarm
07:06
Press the SELECT button.
Turn the knob until the hour setting is correct, then press the SELECT
button.
Turn the knob until the minute setting is correct, then press the SELECT
button.
The display says Time Set with the new time shown beneath for 3 seconds,
then returns to the radio stationdisplay.
Press the SELECT button. (Note: if you make a mistake at any point, press
the BACK button to go back to the previous screen.)
Turn the knob until the display says <Confi gure>.
Press the SELECT button.
Turn the knob until the display says <Clock>.
Turn the knob until the display says <Set Alarm>.
Press the SELECT button.
Turn the knob to swap between Yes and No and press the SELECT button.
If you choose "No" then the alarm is turned off. The display says Alarm is
Off for 3 seconds, then returns to the radio station Display.
If you choose "Yes" then the display enables you to set the time for the
alarm.
Turn the knob until the hour setting is correct, then press the SELECT
button.
Turn the knob until the minute setting is correct, then press the SELECT
button.
- 29 -
Operating
Operating