Inhaltsverzeichnis
Werbung
HIGH PRESSURE CLEANER
The numbers in the text refer to the diagrams
on pages 2-3.
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before using
this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
Introduction
The high pressure cleaner GRM1022 is quick and
efficient for cleaning vehicles, machines, boats,
buildings, etc., by the removal of persistent dirt
using clean water and chemical detergents.
When using chemical detergents, only use
biodegradable types. Only clean vehicle engines
in areas in which suitable oil traps are installed.
Contents
1. Machine information
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE INfoRMATIoN
Technical specifications
Voltage
Input power
Max. pressure water supply
Allowable pressure
Max. water temperature
Max. working flow rate
Weight
IP class
LWA(acoustic power)
Vibration value
Product information
Fig. 1
1. High pressure washer
2. On/off switch
3. Water inlet
4. Wheel
5. Water outlet
6. Gun holder
7. Handle
8. Hose hook
9. Spray gun
10. Adjustable Spray Lance
11. Turbo lance
12. Lance extention
2. SAfETy INSTRUCTIoNS
Explanation of the symbols
Safety instructions
When using electric machines always observe the
220-240 V~ 50/60Hz
safety regulations applicable in your country to
1400 W
reduce the risk of fire, electric shock and personal
12 bar
injury. Read the following safety instructions and
110 bar
also the enclosed safety instructions.
50º C
6.5 l/min
Electrical safety
• A lways check if your mains voltage
5.7 kg
IPX5
• W hen replacing old cables or plugs:
92 dB(A)
• T hrow away old cables or plugs immediately
<2.5m/s2
• W hen using extension cables:
• O nly use an approved extension cable that is
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
DO NOT direct the water jet
towards people or animals.DO NOT
direct the water jet towards the unit
itself, electrical parts or towards
other electrical
The machine is not intended to be
connected to the potable water mains.
corresponds with the value on the type plate.
as soon as new ones have replaced these. It is
dangerous to put the plug of a loose cable into
the socket outlet.
suitable for the machine's power. The cores
must have a diameter of at least 1.5 mm
When the extension cable is on a reel, unroll
the cable in its entirety.
2
.
3
Werbung
Inhaltsverzeichnis
