4.2 Circuit diagram
Use terminal B2 only to connect
Solar module(s)
the second battery.
(max. 260 Watt/
Never connect a consumer
520W)
to this terminal
+
FOX-350
Battery 1 = 12,6 V
I Solar
=
+
Solar
+
B1
+
+
+
Battery 1
Battery 2
Battery 1 (B1) always
has priority when charging
Caution!
If two batteries are connected,
the negative poles must be
connected directly!
57
Caution!
!
8,5 A
B2
+
Load
+
consumer
(max 12A)
Circuit diagram
5
Operation
In order to be able to adjust the display to the
requirements of the respective user, the FOX-350
offers the option of several display masks via the
Display/Enter key
In addition, the arrow keys
operator to manually control the load output and to
select the battery to be charged.
Additionally you can set some system parameters like
the system voltage, the maximum charging voltage
and the level of the discharge protection.
Should you get lost in the various display masks, the
ESC key
will take you back to the default display.
The illustrations on the following pages provide an
overview of the various setting possibilities.
Note:
After having switched the battery output manually, the
charge regulator keeps this manual setting for 12
hours.
Afterwards, the regulator goes back to the automatic
control of the battery output.
Operation
E
enable the
58